Quantcast
Channel: Ubuntu Forums - Installation & Upgrades
Viewing all 26379 articles
Browse latest View live
↧

[ubuntu] Upgrade hangs during search for obsolete software

September 22, 2016, 4:57 pm
$
0
0
My computer asked me if I wanted to upgrade to 16.04, and I clicked yes.
The upgrade stalled in the "Cleaning up" step.
It says "Searching for obsolete software" and the terminal text displays this:

...
173 new root certificates were added to your trust store.
Import process completed.
Done
done.

The window greys out for a few seconds, then becomes active again for a few seconds, over and over again.

$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04.1 LTS"

$ uname -a
Linux desktop 3.13.0-96-generic #143-Ubuntu SMP Mon Aug 29 20:15:20 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

What should I do to finish the upgrade?
↧
Search

Need Help Recovering from Crash during Updgrade (14.04 --> 15.10)

September 22, 2016, 9:28 pm
$
0
0
I recently decided to upgrade my system after not doing so for some time. I had been running Ubuntu 14.04 and attempted to upgrade to Ubuntu 15.10. I left my computer running the upgrade during the day and it appears to have powered off at some point during the upgrade. The system is now unable to properly boot. I tried the "Attempt to repair your current installation" option from this thread (http://askubuntu.com/questions/24913...-during-update) but the command dpkg-reconfigure -a but it appears "-a" isn't an option and a series of other commands was offered. The computer only runs Ubuntu and doesn't have any separate partitions.

I'm usually good about backing up my files but I've unfortunately uploaded a lot of photos recently without doing so. Any support to find a solution where I save the files that are on the computer would be greatly appreciated!

I've been using Ubuntu for some time but my knowledge level is pretty low, so the more detail and specific commands to enter into GRUB or terminal you can provide, the better.
↧
↧

[ubuntu] Grub Error post install of Ubuntu 16.04

September 22, 2016, 10:37 pm
$
0
0
Hello,

I recently decided to install Ubuntu, after playing around with Knoppix. At first I simply wanted to use a Linux distro on a bootable usb, though that changed after I downloaded the Ubuntu iso.

So, right now, I'm stuck on Ubuntu Live from the usb where I downloaded the ISO. Upon starting my PC, I have to hit F12 in order to bring up the boot screen. Selecting the usual hard drive partition which has Windows 7 installed, no longer works. I'm prompted with a Grub Rescue terminal. The only way I can successful boot my PC, is by running Ubuntu off of my usb.

Initially, after selecting to install Ubuntu, I decided to click the option "Install alongside Windows 7" in the installer menu. Things seemed to have been installed fine and, I didn't have any issues. Until I tried to reboot my PC. Following the advice of several Google results, I used Boot-Info to generate this report.

In the report, a few things will be evident, I have two usb drives plugged in. One with the Ubuntu 16.04 ISO on it (Which I'm currently booted into), and another with Knoppix. The internal hard drive, labelled sda1(?) is my Windows 7 installation.

Ideally, I'd like things to be resolved so that I can dual boot, and eventually eliminate my Windows 7 installation once I'm more comfortable with Ubuntu. At this point it should be evident that I'm not an experienced Linux user. Though, I do own a ageing Mac book, so I am familiar with terminal some what. This whole not being able to boot my PC without having this USB drive plugged in is rather an inconvenience, lol. So if you can help, I'd be very appreciative.

-- Additional Comment --
Upon reviewing several Google results, I found a user that mentioned something about Grub dumping files onto the USB device rather than into the appropriate boot folder on the new Ubuntu installation. After reviewing the USB drive and, Windows 7 installation. It appears to me that maybe this is what has happened in my situation. As under the Windows 7 installation, I have a folders at the following path: Windows/Boot/; such as DVD, EFI, Fonts and, PCAT. Which doesn't seem typical, though I've never been into the path on Windows 7 to notice anything different. On the Ubuntu installation, I only have the following files in this path: /boot/grub; gfxblacklist.txt, grubenv, unicode.pf2. I tried copying the files previously mentioned into the latter path, but ran into some permissions issues so I couldn't test it on my own. These files may also be in the Windows 7 path due to Boot-Info repair tool, as I think I did select to add Grub to that partition :/
↧

Installing FlashPlayer in Mozilla Firefox Browser

September 22, 2016, 11:42 pm
$
0
0
Hello guys,
I am new to Ubuntu so please help me by solving one problem.
I was installing flash downloader in mozilla brower and when I followed their instruction of running this command

sudo apt-get install build-essential subversion git-core checkinstall yasm texi2html libfaac-dev libfaad-dev libmp3lame-dev libsdl1.2-dev libtheora-dev libx11-dev libxvidcore4-dev zlib1g-dev

I am getting error of
E: Unable to locate package libxvidcore4-dev
Please help!
Thanks.
prob_ubuntu.jpg
Attached Images
↧

[ubuntu] Ubuntu 16.04 won't shut off USB when shut down

September 23, 2016, 12:40 am
$
0
0
I just installed Ubuntu 16.01.1 on a Asus Z170A MB system.

The USB card reader doesn't shut off when the system shuts down. The USB floppy continually seeks when the system is on, but does shut off when the system shuts down.

These all work fine on Windows 10 on the same machine (started from a separate, hard switched, hard drive).

The Asus MB has a strange BIOS, not sure if it's UEFI, BIOS, or hybrid. The instructions from Ubuntu when loading were unclear. I selected to enable third party drivers.

How can I fix this?

Thanks!
↧
↧

CItrix reciever Application invisable

September 23, 2016, 12:50 am
$
0
0
Hey,

After another thread with great guy`s that wanna help -> https://ubuntuforums.org/showthread.php?t=2337077
i have reinstall everything and at this point Citrix Reciever doenst work.
When i`ll open a a full Desktop from citrix reciever everythings fine. But when i open a application trough citrix reciever its invisable look at attachement.

Selection_003.png

When i look at the log i see these errors:

Code:
sep 23 09:33:47 laptop gnome-session[1845]: (gnome-software:1999): Gs-WARNING **: failed to get updates: no results to showsep 23 09:34:00 laptop gnome-session[1845]: (gnome-shell:1897): Gtk-WARNING **: _XEMBED_INFO property has wrong type
sep 23 09:34:00 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_register_x_window: assertion 'g_hash_table_lookup (display->xids, xwindowp) == NULL' failed
sep 23 09:34:00 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_register_x_window: assertion 'g_hash_table_lookup (display->xids, xwindowp) == NULL' failed
sep 23 09:34:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_register_x_window: assertion 'g_hash_table_lookup (display->xids, xwindowp) == NULL' failed
sep 23 09:34:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-WARNING **: STACK_OP_RAISE_ABOVE: window 0x24000e7 not in stack
sep 23 09:34:04 laptop gnome-session[1845]: (gnome-shell:1897): mutter-WARNING **: STACK_OP_RAISE_ABOVE: window 0x24000e7 not in stack
sep 23 09:34:04 laptop gnome-session[1845]: (gnome-shell:1897): mutter-WARNING **: STACK_OP_RAISE_ABOVE: window 0x24000fb not in stack
sep 23 09:34:09 laptop gnome-session[1845]: (gnome-shell:1897): mutter-WARNING **: STACK_OP_RAISE_ABOVE: window 0x24000fb not in stack
sep 23 09:34:31 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_register_x_window: assertion 'g_hash_table_lookup (display->xids, xwindowp) == NULL' failed
sep 23 09:34:31 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_register_x_window: assertion 'g_hash_table_lookup (display->xids, xwindowp) == NULL' failed
sep 23 09:34:31 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_register_x_window: assertion 'g_hash_table_lookup (display->xids, xwindowp) == NULL' failed
sep 23 09:34:31 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_register_x_window: assertion 'g_hash_table_lookup (display->xids, xwindowp) == NULL' failed
sep 23 09:34:32 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_unregister_x_window: assertion 'g_hash_table_lookup (display->xids, &xwindow) != NULL' failed
sep 23 09:34:32 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_unregister_x_window: assertion 'g_hash_table_lookup (display->xids, &xwindow) != NULL' failed
sep 23 09:34:32 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_unregister_x_window: assertion 'g_hash_table_lookup (display->xids, &xwindow) != NULL' failed
sep 23 09:34:32 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_register_x_window: assertion 'g_hash_table_lookup (display->xids, xwindowp) == NULL' failed
sep 23 09:34:32 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_register_x_window: assertion 'g_hash_table_lookup (display->xids, xwindowp) == NULL' failed
sep 23 09:34:33 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_unregister_x_window: assertion 'g_hash_table_lookup (display->xids, &xwindow) != NULL' failed
sep 23 09:34:33 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_unregister_x_window: assertion 'g_hash_table_lookup (display->xids, &xwindow) != NULL' failed
sep 23 09:34:33 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_unregister_x_window: assertion 'g_hash_table_lookup (display->xids, &xwindow) != NULL' failed
sep 23 09:35:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-WARNING **: STACK_OP_RAISE_ABOVE: window 0x240011d not in stack
sep 23 09:35:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-WARNING **: STACK_OP_LOWER_BELOW: sibling window 0x240011d not in stack
sep 23 09:35:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_unregister_x_window: assertion 'g_hash_table_lookup (display->xids, &xwindow) != NULL' failed
sep 23 09:35:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-WARNING **: STACK_OP_RAISE_ABOVE: window 0x240011d not in stack
sep 23 09:35:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-WARNING **: STACK_OP_LOWER_BELOW: sibling window 0x240011d not in stack
sep 23 09:35:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_unregister_x_window: assertion 'g_hash_table_lookup (display->xids, &xwindow) != NULL' failed
sep 23 09:35:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-WARNING **: STACK_OP_RAISE_ABOVE: window 0x240011d not in stack
sep 23 09:35:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-WARNING **: STACK_OP_LOWER_BELOW: sibling window 0x240011d not in stack
sep 23 09:35:02 laptop gnome-session[1845]: (gnome-shell:1897): mutter-CRITICAL **: meta_display_unregister_x_window: assertion 'g_hash_table_lookup (display->xids, &xwindow) != NULL' failed
i have the same problem with citrix 13.4 and 13.3
Attached Images
↧

Installation of Kernel 4.5 or 4.6 with automatic upgrades

September 23, 2016, 8:12 am
$
0
0
Since upgrading to 16.04, I have had a lot of issues with my system hanging when putting it to sleep. I've been doing some research on this, and the most common and relevant root cause of this that I have found is that kernel 4.4 has some known issues with power management and upgrading to 4.5 or 4.6 fixes this. I'd like to install a stable version of one of these kernels on my system to see if it will work for me.

The issue that I'm hitting is I'd like to be able to add an apt repository to my system which contains one of these kernels so that if any new security updates come out for them, I don't have to manually track that and upgrade them. However, I've had no luck finding a ppa for this, which seems odd to me since I can find a ppa for most any package I can think of that I want the latest version of and the Kernel should be the most prolific package out there. In my research, everyone seems to suggest downloading the .deb packages from kernel.ubuntu.com and installing them, which I'd like to avoid for reasons stated earlier. I did find the canotical-kernel-team ppa, but that doesn't seem to be recommended for stable builds and appears to be updated on a more regular basis than what I'd prefer. Any other suggestions I can try?
↧

[SOLVED] upgrade 14.04 to 16.04, X won't start (not a graphics issue?)

September 23, 2016, 10:36 am
$
0
0
Hello everybody,
I installed xubuntu 14.04 on a friend's laptop a year back.
a couple of weeks ago, she agreed to upgrade to 16.04, and after that all she got was a black screen when booting.

i have the machine here now.
the system is upgraded, it is 16.04.1 LTS now, but the graphical session won't start.

Or, to be more precise, it looks like it starts ok, but stays completely black.

Code:
lspci -k
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
    Subsystem: Fujitsu Technology Solutions Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub
    Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
    Subsystem: Fujitsu Technology Solutions Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller
    Kernel driver in use: i915
    Kernel modules: i915, intelfb
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
    Subsystem: Fujitsu Technology Solutions Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02)
    Subsystem: Fujitsu Technology Solutions Conexant softmodem SmartCP
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 02)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02)
    Kernel driver in use: pcieport
    Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02)
    Subsystem: Fujitsu Technology Solutions NM10/ICH7 Family USB UHCI Controller
    Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02)
    Subsystem: Fujitsu Technology Solutions NM10/ICH7 Family USB UHCI Controller
    Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02)
    Subsystem: Fujitsu Technology Solutions NM10/ICH7 Family USB UHCI Controller
    Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02)
    Subsystem: Fujitsu Technology Solutions NM10/ICH7 Family USB UHCI Controller
    Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
    Subsystem: Fujitsu Technology Solutions NM10/ICH7 Family USB2 EHCI Controller
    Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    Subsystem: Fujitsu Technology Solutions 82801GBM (ICH7-M) LPC Interface Bridge
    Kernel driver in use: lpc_ich
    Kernel modules: intel_rng, lpc_ich, leds_ss4200
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
    Subsystem: Fujitsu Technology Solutions 82801G (ICH7 Family) IDE Controller
    Kernel driver in use: ata_piix
    Kernel modules: pata_acpi
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02)
    Subsystem: Fujitsu Technology Solutions 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode]
    Kernel driver in use: ahci
    Kernel modules: ahci
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
    Subsystem: Fujitsu Technology Solutions NM10/ICH7 Family SMBus Controller
    Kernel modules: i2c_i801
01:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    Subsystem: Intel Corporation WM3945ABG MOW2
    Kernel driver in use: iwl3945
    Kernel modules: iwl3945
07:08.0 Ethernet controller: Intel Corporation PRO/100 VE Network Connection (rev 02)
    Subsystem: Fujitsu Technology Solutions PRO/100 VE Network Connection
    Kernel driver in use: e100
    Kernel modules: e100
07:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
    Subsystem: Fujitsu Technology Solutions R5C832 IEEE 1394 Controller
    Kernel driver in use: firewire_ohci
    Kernel modules: firewire_ohci
07:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
    Subsystem: Fujitsu Technology Solutions R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter
    Kernel driver in use: sdhci-pci
    Kernel modules: sdhci_pci
07:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
    Subsystem: Fujitsu Technology Solutions R5C592 Memory Stick Bus Host Adapter
    Kernel driver in use: r592
    Kernel modules: r592
07:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
    Subsystem: Fujitsu Technology Solutions xD-Picture Card Controller
    Kernel driver in use: r852
    Kernel modules: r852
yes, not the newest anymore.


Code:
cat /var/log/Xorg.0.log
[  324.434]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[  324.434] X Protocol Version 11, Revision 0
[  324.434] Build Operating System: Linux 3.13.0-92-generic i686 Ubuntu
[  324.434] Current Operating System: Linux thinkpad 3.16.0-77-generic #99~14.04.1-Ubuntu SMP Tue Jun 28 19:18:41 UTC 2016 i686
[  324.434] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-77-generic root=UUID=b3450d19-8ac3-4084-85d4-d423e7cf4ffa ro quiet splash atkbd.reset vt.handoff=7
[  324.434] Build Date: 22 July 2016  07:50:53AM
[  324.434] xorg-server 2:1.18.3-1ubuntu2.3 (For technical support please see http://www.ubuntu.com/support)
[  324.435] Current version of pixman: 0.33.6
[  324.435]    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  324.435] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  324.435] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 23 19:25:19 2016
[  324.435] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  324.435] (==) No Layout section.  Using the first Screen section.
[  324.435] (==) No screen section available. Using defaults.
[  324.435] (**) |-->Screen "Default Screen Section" (0)
[  324.435] (**) |  |-->Monitor "<default monitor>"
[  324.436] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[  324.436] (==) Automatically adding devices
[  324.436] (==) Automatically enabling devices
[  324.436] (==) Automatically adding GPU devices
[  324.436] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  324.436] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  324.436]    Entry deleted from font path.
[  324.436] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[  324.436]    Entry deleted from font path.
[  324.436] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[  324.436]    Entry deleted from font path.
[  324.436] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[  324.436]    Entry deleted from font path.
[  324.436] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[  324.436]    Entry deleted from font path.
[  324.436] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/Type1,
    built-ins
[  324.436] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[  324.436] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[  324.436] (II) Loader magic: 0xb77b7700
[  324.436] (II) Module ABI versions:
[  324.436]    X.Org ANSI C Emulation: 0.4
[  324.436]    X.Org Video Driver: 20.0
[  324.436]    X.Org XInput driver : 22.1
[  324.436]    X.Org Server Extension : 9.0
[  324.437] (++) using VT number 7

[  324.437] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  324.438] (II) xfree86: Adding drm device (/dev/dri/card0)
[  324.441] (--) PCI:*(0:0:2:0) 8086:27a2:1734:10ad rev 3, Mem @ 0xdc100000/524288, 0xc0000000/268435456, 0xdc200000/262144, I/O @ 0x00001800/8
[  324.441] (--) PCI: (0:0:2:1) 8086:27a6:1734:10ad rev 3, Mem @ 0xdc180000/524288
[  324.441] (II) LoadModule: "glx"
[  324.441] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  324.442] (EE) Failed to load /usr/lib/xorg/modules/extensions/libglx.so: libGL.so.1: cannot open shared object file: No such file or directory
[  324.442] (II) UnloadModule: "glx"
[  324.442] (II) Unloading glx
[  324.442] (EE) Failed to load module "glx" (loader failed, 7)
[  324.442] (==) Matched intel as autoconfigured driver 0
[  324.442] (==) Matched intel as autoconfigured driver 1
[  324.442] (==) Matched modesetting as autoconfigured driver 2
[  324.442] (==) Matched fbdev as autoconfigured driver 3
[  324.442] (==) Matched vesa as autoconfigured driver 4
[  324.442] (==) Assigned the driver to the xf86ConfigLayout
[  324.442] (II) LoadModule: "intel"
[  324.442] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  324.443] (II) Module intel: vendor="X.Org Foundation"
[  324.443]    compiled for 1.18.1, module version = 2.99.917
[  324.443]    Module class: X.Org Video Driver
[  324.443]    ABI class: X.Org Video Driver, version 20.0
[  324.443] (II) LoadModule: "modesetting"
[  324.443] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  324.443] (II) Module modesetting: vendor="X.Org Foundation"
[  324.443]    compiled for 1.18.3, module version = 1.18.3
[  324.443]    Module class: X.Org Video Driver
[  324.443]    ABI class: X.Org Video Driver, version 20.0
[  324.443] (II) LoadModule: "fbdev"
[  324.443] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[  324.444] (II) Module fbdev: vendor="X.Org Foundation"
[  324.444]    compiled for 1.18.1, module version = 0.4.4
[  324.444]    Module class: X.Org Video Driver
[  324.444]    ABI class: X.Org Video Driver, version 20.0
[  324.444] (II) LoadModule: "vesa"
[  324.444] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[  324.444] (II) Module vesa: vendor="X.Org Foundation"
[  324.444]    compiled for 1.18.1, module version = 2.3.4
[  324.444]    Module class: X.Org Video Driver
[  324.444]    ABI class: X.Org Video Driver, version 20.0
[  324.444] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[  324.445] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[  324.445] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[  324.445] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[  324.445] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  324.445] (II) FBDEV: driver for framebuffer: fbdev
[  324.445] (II) VESA: driver for VESA chipsets: vesa
[  324.445] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[  324.445] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917+git20160325-1ubuntu1 (Timo Aaltonen <tjaalton@debian.org>)
[  324.445] (II) intel(0): SNA compiled for use with valgrind
[  324.445] (WW) Falling back to old probe method for modesetting
[  324.445] (WW) Falling back to old probe method for fbdev
[  324.445] (II) Loading sub module "fbdevhw"
[  324.445] (II) LoadModule: "fbdevhw"
[  324.446] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[  324.446] (II) Module fbdevhw: vendor="X.Org Foundation"
[  324.446]    compiled for 1.18.3, module version = 0.0.2
[  324.446]    ABI class: X.Org Video Driver, version 20.0
[  324.446] (WW) Falling back to old probe method for vesa
[  324.446] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[  324.446] (--) intel(0): CPU: x86, sse2, sse3, ssse3; using a maximum of 2 threads
[  324.446] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[  324.446] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[  324.446] (==) intel(0): RGB weight 888
[  324.446] (==) intel(0): Default visual is TrueColor
[  324.447] (II) intel(0): Output LVDS1 has no monitor section
[  324.447] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[  324.447] (II) intel(0): Enabled output LVDS1
[  324.447] (II) intel(0): Output VGA1 has no monitor section
[  324.447] (II) intel(0): Enabled output VGA1
[  324.447] (II) intel(0): Output DVI1 has no monitor section
[  324.447] (II) intel(0): Enabled output DVI1
[  324.447] (II) intel(0): Output TV1 has no monitor section
[  324.447] (II) intel(0): Enabled output TV1
[  324.447] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[  324.447] (II) intel(0): Output VIRTUAL1 has no monitor section
[  324.447] (II) intel(0): Enabled output VIRTUAL1
[  324.447] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
[  324.448] (==) intel(0): TearFree disabled
[  324.448] (==) intel(0): DPI set to (96, 96)
[  324.448] (II) Loading sub module "dri2"
[  324.448] (II) LoadModule: "dri2"
[  324.448] (II) Module "dri2" already built-in
[  324.448] (II) Loading sub module "present"
[  324.448] (II) LoadModule: "present"
[  324.448] (II) Module "present" already built-in
[  324.448] (II) UnloadModule: "modesetting"
[  324.448] (II) Unloading modesetting
[  324.448] (II) UnloadModule: "fbdev"
[  324.448] (II) Unloading fbdev
[  324.448] (II) UnloadSubModule: "fbdevhw"
[  324.448] (II) Unloading fbdevhw
[  324.448] (II) UnloadModule: "vesa"
[  324.448] (II) Unloading vesa
[  324.448] (==) Depth 24 pixmap format is 32 bpp
[  324.448] (II) intel(0): SNA initialized with Alviso (gen3) backend
[  324.448] (==) intel(0): Backing store enabled
[  324.448] (==) intel(0): Silken mouse enabled
[  324.448] (II) intel(0): HW Cursor enabled
[  324.448] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  324.449] (==) intel(0): DPMS enabled
[  324.449] (==) intel(0): Display hotplug detection enabled
[  324.449] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[  324.449] (II) intel(0): [DRI2] Setup complete
[  324.449] (II) intel(0): [DRI2]  DRI driver: i915
[  324.449] (II) intel(0): [DRI2]  VDPAU driver: va_gl
[  324.449] (II) intel(0): direct rendering: DRI2 enabled
[  324.449] (II) intel(0): hardware support for Present enabled
[  324.449] (--) RandR disabled
[  324.462] (II) SELinux: Disabled on system
[  324.476] (II) intel(0): switch to mode 1280x800@60.0 on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
[  324.476] (II) intel(0): Setting screen physical size to 338 x 211
[  324.539] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[  324.539] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  324.539] (II) LoadModule: "evdev"
[  324.539] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  324.540] (II) Module evdev: vendor="X.Org Foundation"
[  324.540]    compiled for 1.18.1, module version = 2.10.1
[  324.540]    Module class: X.Org XInput Driver
[  324.540]    ABI class: X.Org XInput driver, version 22.1
[  324.540] (II) Using input driver 'evdev' for 'Power Button'
[  324.540] (**) Power Button: always reports core events
[  324.540] (**) evdev: Power Button: Device: "/dev/input/event3"
[  324.540] (--) evdev: Power Button: Vendor 0 Product 0x1
[  324.540] (--) evdev: Power Button: Found keys
[  324.540] (II) evdev: Power Button: Configuring as keyboard
[  324.540] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[  324.540] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  324.540] (**) Option "xkb_rules" "evdev"
[  324.540] (**) Option "xkb_model" "pc105"
[  324.540] (**) Option "xkb_layout" "fi"
[  324.571] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[  324.571] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  324.571] (II) Using input driver 'evdev' for 'Video Bus'
[  324.571] (**) Video Bus: always reports core events
[  324.571] (**) evdev: Video Bus: Device: "/dev/input/event6"
[  324.571] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  324.571] (--) evdev: Video Bus: Found keys
[  324.571] (II) evdev: Video Bus: Configuring as keyboard
[  324.571] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input7/event6"
[  324.571] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  324.571] (**) Option "xkb_rules" "evdev"
[  324.571] (**) Option "xkb_model" "pc105"
[  324.571] (**) Option "xkb_layout" "fi"
[  324.572] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  324.572] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  324.572] (II) Using input driver 'evdev' for 'Power Button'
[  324.572] (**) Power Button: always reports core events
[  324.572] (**) evdev: Power Button: Device: "/dev/input/event0"
[  324.572] (--) evdev: Power Button: Vendor 0 Product 0x1
[  324.573] (--) evdev: Power Button: Found keys
[  324.573] (II) evdev: Power Button: Configuring as keyboard
[  324.573] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[  324.573] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  324.573] (**) Option "xkb_rules" "evdev"
[  324.573] (**) Option "xkb_model" "pc105"
[  324.573] (**) Option "xkb_layout" "fi"
[  324.574] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[  324.574] (II) No input driver specified, ignoring this device.
[  324.574] (II) This device may have been added with another device file.
[  324.574] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[  324.574] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[  324.574] (II) Using input driver 'evdev' for 'Sleep Button'
[  324.575] (**) Sleep Button: always reports core events
[  324.575] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[  324.575] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[  324.575] (--) evdev: Sleep Button: Found keys
[  324.575] (II) evdev: Sleep Button: Configuring as keyboard
[  324.575] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[  324.575] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[  324.575] (**) Option "xkb_rules" "evdev"
[  324.575] (**) Option "xkb_model" "pc105"
[  324.575] (**) Option "xkb_layout" "fi"
[  324.576] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event7)
[  324.576] (II) No input driver specified, ignoring this device.
[  324.576] (II) This device may have been added with another device file.
[  324.577] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[  324.577] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  324.577] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  324.577] (**) AT Translated Set 2 keyboard: always reports core events
[  324.577] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[  324.577] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  324.577] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  324.577] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  324.577] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[  324.577] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[  324.577] (**) Option "xkb_rules" "evdev"
[  324.577] (**) Option "xkb_model" "pc105"
[  324.577] (**) Option "xkb_layout" "fi"
[  324.578] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event5)
[  324.579] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  324.579] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[  324.579] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[  324.579] (II) LoadModule: "synaptics"
[  324.579] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[  324.579] (II) Module synaptics: vendor="X.Org Foundation"
[  324.579]    compiled for 1.18.1, module version = 1.8.2
[  324.579]    Module class: X.Org XInput Driver
[  324.579]    ABI class: X.Org XInput driver, version 22.1
[  324.579] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[  324.579] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  324.579] (**) Option "Device" "/dev/input/event5"
[  324.624] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472 (res 63)
[  324.624] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448 (res 109)
[  324.624] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[  324.624] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[  324.624] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[  324.624] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  324.624] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  324.624] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  324.648] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[  324.648] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 11)
[  324.648] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[  324.648] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[  324.648] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.040
[  324.648] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  324.649] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[  324.649] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  324.649] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  324.649] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  324.650] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[  324.650] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[  324.974] (II) UnloadModule: "synaptics"
[  324.974] (II) evdev: AT Translated Set 2 keyboard: Close
[  324.974] (II) UnloadModule: "evdev"
[  324.974] (II) evdev: Sleep Button: Close
[  324.974] (II) UnloadModule: "evdev"
[  324.974] (II) evdev: Power Button: Close
[  324.974] (II) UnloadModule: "evdev"
[  324.974] (II) evdev: Video Bus: Close
[  324.974] (II) UnloadModule: "evdev"
[  324.974] (II) evdev: Power Button: Close
[  324.974] (II) UnloadModule: "evdev"
[  325.747] (II) Server terminated successfully (0). Closing log file.
so it just seems to start the server, and shut it down again.
no errors, although i can see a few warnings that might be relevant, even graphics related.

Code:
cat ~/.xsession-errors
openConnection: connect: Tiedostoa tai hakemistoa ei ole
cannot connect to brltty at :0
Script for none started at run_im.
Script for auto started at run_im.
Script for default started at run_im.
init: upstart-event-bridge main prosessi (1871) lopetti tilakoodilla 1
init: upstart-event-bridge main prosessi päättyi, uudelleenkäynnistetään
init: upstart-dbus-session-bridge main prosessi (1897) lopetti tilakoodilla 1
init: upstart-dbus-session-bridge main prosessi päättyi, uudelleenkäynnistetään
init: upstart-dbus-system-bridge main prosessi (1899) lopetti tilakoodilla 1
init: upstart-dbus-system-bridge main prosessi päättyi, uudelleenkäynnistetään
init: upstart-file-bridge main prosessi (1901) lopetti tilakoodilla 1
init: upstart-file-bridge main prosessi päättyi, uudelleenkäynnistetään
Xsession: X session started for niina at pe 23.9.2016 19.26.56 +0300
localuser:niina being added to access control list
openConnection: connect: Tiedostoa tai hakemistoa ei ole
cannot connect to brltty at :0
xfce4-session-Message: SSH authentication agent is already running
gpg-agent[2220]: WARNING: "--write-env-file" is an obsolete option - it has no effect
gpg-agent[2220]: directory '/home/niina/.gnupg' created
gpg-agent[2220]: directory '/home/niina/.gnupg/private-keys-v1.d' created
gpg-agent[2221]: gpg-agent (GnuPG) 2.1.11 started

(x-session-manager:2048): xfce4-session-WARNING **: gpg-agent returned no PID in the variables

(x-session-manager:2048): xfce4-session-WARNING **: xfsm_manager_load_session: Something wrong with /home/niina/.cache/sessions/xfce4-session-thinkpad:0, Does it exist? Permissions issue?

(x-session-manager:2048): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': Tiedostoa tai hakemistoa ei ole

This likely means that your installation is broken.
Try running the command
  gdk-pixbuf-query-loaders > /usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache
to make things work again for the time being.
Couldn't open libGL.so.1: libGL.so.1: jaettua objektitiedostoa ei voi avata: Tiedostoa tai hakemistoa ei ole
Couldn't open libGL.so.1: libGL.so.1: jaettua objektitiedostoa ei voi avata: Tiedostoa tai hakemistoa ei ole
initctl: UPSTART_SESSION isn't set in the environment. Unable to locate the Upstart instance.
Couldn't open libGL.so.1: libGL.so.1: jaettua objektitiedostoa ei voi avata: Tiedostoa tai hakemistoa ei ole
Couldn't open libGL.so.1: libGL.so.1: jaettua objektitiedostoa ei voi avata: Tiedostoa tai hakemistoa ei ole
Unable to update the static FcBlanks: 0x0600
Unable to update the static FcBlanks: 0x0601
Unable to update the static FcBlanks: 0x0602
Unable to update the static FcBlanks: 0x0603
Unable to update the static FcBlanks: 0x06dd
Unable to update the static FcBlanks: 0x070f
Unable to update the static FcBlanks: 0x2028
Unable to update the static FcBlanks: 0x2029
Unable to update the static FcBlanks: 0xfff9
Unable to update the static FcBlanks: 0xfffa
Unable to update the static FcBlanks: 0xfffb
Unable to update the static FcBlanks: 0x0600
Unable to update the static FcBlanks: 0x0601
Unable to update the static FcBlanks: 0x0602
Unable to update the static FcBlanks: 0x0603
Unable to update the static FcBlanks: 0x06dd
Unable to update the static FcBlanks: 0x070f
Unable to update the static FcBlanks: 0x2028
Unable to update the static FcBlanks: 0x2029
Unable to update the static FcBlanks: 0xfff9
Unable to update the static FcBlanks: 0xfffa
Unable to update the static FcBlanks: 0xfffb
Couldn't open libGL.so.1: libGL.so.1: cannot open shared object file: No such file or directory
Epäonnistuminen: Moduulin alustus epäonnistui

** (process:2242): CRITICAL **: volume_control_set_volume_internal: assertion '_tmp1_ == PA_CONTEXT_READY' failed

** (process:2242): CRITICAL **: file /build/buildd/indicator-sound-12.10.2+14.04.20140401/obj-i686-linux-gnu/src/volume-control.c: line 1775: uncaught error: GDBus.Error:org.freedesktop.DBus.Error.InvalidArgs: Ei rajapintaa (g-dbus-error-quark, 16)
No window manager registered on screen 0. To start the xfdesktop without this check, run with --disable-wm-check.
Traceback (most recent call last):
  File "/usr/share/system-config-printer/applet.py", line 32, in <module>
    import cupshelpers.installdriver
ImportError: No module named cupshelpers.installdriver
xfce4-panel: No window manager registered on screen 0. To start the panel without this check, run with --disable-wm-check.

(xfce4-panel:2227): xfce4-panel-CRITICAL **: Failed to spawn the xfce4-panel-wrapper: Lapsiprosessin ”/usr/lib/i386-linux-gnu/xfce4/panel/wrapper-2.0” käynnistäminen epäonnistui (Tiedostoa tai hakemistoa ei ole)
Unable to update the static FcBlanks: 0x0600
Unable to update the static FcBlanks: 0x0601
Unable to update the static FcBlanks: 0x0602
Unable to update the static FcBlanks: 0x0603
Unable to update the static FcBlanks: 0x06dd
Unable to update the static FcBlanks: 0x070f
Unable to update the static FcBlanks: 0x2028
Unable to update the static FcBlanks: 0x2029
Unable to update the static FcBlanks: 0xfff9
Unable to update the static FcBlanks: 0xfffa
Unable to update the static FcBlanks: 0xfffb

(wrapper-1.0:2330): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': Tiedostoa tai hakemistoa ei ole

This likely means that your installation is broken.
Try running the command
  gdk-pixbuf-query-loaders > /usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache
to make things work again for the time being.

(wrapper-1.0:2330): weather-WARNING **: Failed to open fallback icon from standard theme: /usr/share/xfce4/weather/icons/liquid/22/nodata.png

(wrapper-1.0:2330): weather-WARNING **: No default icon theme? This should not happen, plugin will crash!

(wrapper-1.0:2330): Gtk-CRITICAL **: IA__gtk_misc_set_alignment: assertion 'GTK_IS_MISC (misc)' failed

(wrapper-1.0:2330): Gtk-CRITICAL **: gtk_box_pack: assertion 'GTK_IS_WIDGET (child)' failed

(wrapper-1.0:2330): Gtk-CRITICAL **: IA__gtk_misc_set_alignment: assertion 'GTK_IS_MISC (misc)' failed

(wrapper-1.0:2330): weather-WARNING **: Failed to open fallback icon from standard theme: /usr/share/xfce4/weather/icons/liquid/22/nodata.png

(wrapper-1.0:2330): Gtk-CRITICAL **: IA__gtk_image_set_from_pixbuf: assertion 'GTK_IS_IMAGE (image)' failed

(wrapper-1.0:2330): weather-WARNING **: Failed to open fallback icon from standard theme: /usr/share/xfce4/weather/icons/liquid/128/nodata.png

(wrapper-1.0:2330): weather-WARNING **: Failed to open fallback icon from standard theme: /usr/share/xfce4/weather/icons/liquid/22/nodata.png

(wrapper-1.0:2330): Gtk-CRITICAL **: IA__gtk_image_set_from_pixbuf: assertion 'GTK_IS_IMAGE (image)' failed

(wrapper-1.0:2330): weather-WARNING **: Failed to open fallback icon from standard theme: /usr/share/xfce4/weather/icons/liquid/128/nodata.png

(wrapper-1.0:2330): weather-WARNING **: Failed to open fallback icon from standard theme: /usr/share/xfce4/weather/icons/liquid/22/nodata.png

(wrapper-1.0:2330): Gtk-CRITICAL **: IA__gtk_image_set_from_pixbuf: assertion 'GTK_IS_IMAGE (image)' failed

(wrapper-1.0:2330): weather-WARNING **: Failed to open fallback icon from standard theme: /usr/share/xfce4/weather/icons/liquid/128/nodata.png

(wrapper-1.0:2330): weather-WARNING **: Failed to open fallback icon from standard theme: /usr/share/xfce4/weather/icons/liquid/22/nodata.png

(wrapper-1.0:2330): Gtk-CRITICAL **: IA__gtk_image_set_from_pixbuf: assertion 'GTK_IS_IMAGE (image)' failed

(wrapper-1.0:2330): weather-WARNING **: Failed to open fallback icon from standard theme: /usr/share/xfce4/weather/icons/liquid/128/nodata.png
Unable to update the static FcBlanks: 0x0600
Unable to update the static FcBlanks: 0x0601
Unable to update the static FcBlanks: 0x0602
Unable to update the static FcBlanks: 0x0603
Unable to update the static FcBlanks: 0x06dd
Unable to update the static FcBlanks: 0x070f
Unable to update the static FcBlanks: 0x2028
Unable to update the static FcBlanks: 0x2029
Unable to update the static FcBlanks: 0xfff9
Unable to update the static FcBlanks: 0xfffa
Unable to update the static FcBlanks: 0xfffb

(gst-plugin-scanner:2280): GStreamer-WARNING **: Failed to load plugin '/usr/lib/i386-linux-gnu/gstreamer-1.0/libgstgtksink.so': libGL.so.1: cannot open shared object file: No such file or directory

(gst-plugin-scanner:2280): GStreamer-WARNING **: Failed to load plugin '/usr/lib/i386-linux-gnu/gstreamer-1.0/libgstopengl.so': libGL.so.1: cannot open shared object file: No such file or directory

(gst-plugin-scanner:2280): GStreamer-WARNING **: Failed to load plugin '/usr/lib/i386-linux-gnu/gstreamer-1.0/libgstlibav.so': libGL.so.1: cannot open shared object file: No such file or directory

(gst-plugin-scanner:2280): GStreamer-WARNING **: Failed to load plugin '/usr/lib/i386-linux-gnu/gstreamer-1.0/libgstopencv.so': libGL.so.1: cannot open shared object file: No such file or directory

(xfdesktop:2231): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': Tiedostoa tai hakemistoa ei ole

This likely means that your installation is broken.
Try running the command
  gdk-pixbuf-query-loaders > /usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache
to make things work again for the time being.
Unable to update the static FcBlanks: 0x0600
Unable to update the static FcBlanks: 0x0601
Unable to update the static FcBlanks: 0x0602
Unable to update the static FcBlanks: 0x0603
Unable to update the static FcBlanks: 0x06dd
Unable to update the static FcBlanks: 0x070f
Unable to update the static FcBlanks: 0x2028
Unable to update the static FcBlanks: 0x2029
Unable to update the static FcBlanks: 0xfff9
Unable to update the static FcBlanks: 0xfffa
Unable to update the static FcBlanks: 0xfffb
xfsettingsd: No window manager registered on screen 0.

(xfsettingsd:2232): xfsettingsd-WARNING **: Failed to get the _NET_NUMBER_OF_DESKTOPS property.
gpg-agent[2221]: SIGTERM received - shutting down ...
gpg-agent[2221]: gpg-agent (GnuPG) 2.1.11 stopped

(xfwm4:2223): Gtk-CRITICAL **: IA__gtk_main_quit: assertion 'main_loops != NULL' failed
xfwm4: Fatal IO error 2 (Tiedostoa tai hakemistoa ei ole) on X server :0.0.
xfdesktop: Fatal IO error 2 (Tiedostoa tai hakemistoa ei ole) on X server :0.0.
i have tried to execute "gdk-pixbuf-query-loaders > /usr/lib/i386-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache" both with and without sudo, but all iget is "gdk-pixbuf-query-loaders is currently not installed..."

what now?
↧
Search

Can't use Updater due to automatic kernel upgrade

September 23, 2016, 11:12 am
$
0
0
Hello!

I've got Ubuntu 14.04 Desktop ed. w/ kernel ver. 3.16 About a month ago I allowed the system to upgrade the kernel to ver. 4.xx, but after that I couldn't boot my system, so I re-installed everything from Clonezilla image and now I have again 3.16 It's all nice, but everyday I see this annoying upgrade proposal and what's even worse is that I think that I can't install any Ubuntu updates, since I get this kernel upgrade box and when I close it, then there's no update at all. You can take a look at those two print screens I've added.

UPDATE:
I downloaded and installed Synaptic, so I can manually update installed packages.
↧
↧

Help me get Ubuntu working

September 23, 2016, 11:49 am
$
0
0
Hey, Thanks for reading this post. Basically, I've got a Windows 10 OS as my primary OS, but I'm trying to learn about programming/ coding and everyone has recommended I use Ubuntu to get good with Linux. My problem is that I can't seem to get Ubuntu to run at all. I've partitioned my Hard Drive with more than enough space for another OS, I've downloaded Ubuntu 16.04 onto a DVD, I've changed my System Settings to boot from the disk, and I have tried to run Ubuntu without installing as well as tried to just install it. Every time it'll whir for a bit, make a bit of progress, and then the progress dots stop filling up. I get no sort of error report, and I've had the system run diagnostics on itself and it says it's fully functional, so there's no way the files are corrupted or anything like that. Can anyone help?
I forgot my system Specs!
Processor: Intel(r) Core (TM) i7-6700HQ CPU @2.60 GHz
RAM: 16 GB
64-bit Operating System
Hope this helps!
↧

Help! Trying to install 14.04 on HP box with Nvidia GTX-745.

September 23, 2016, 1:11 pm
$
0
0
Trying to install 14.04 on a HP Envy with a Nivida GTX-745 graphics card.
The 14.04 cd is running as if installing. However, the monitor screen is black.
Did not get a 'no signal' error.

Any help appreciated as the computer does not work now.

dlw
↧

GUDEV missing during install of ModemManager

September 23, 2016, 1:12 pm
$
0
0
I am running Ubuntu 16.04.1 64bit LTS. I'd like to use my mobile phone to connect to the internet so I am trying to install ModemManager-1.6.2

If I run ---
./configure --prefix=/usr
--sysconfdir=/etc
--localstatedir=/var
--enable-more-warnings=no
--with-suspend-resume=system
--disable-static && make

then I receive this error message ----
checking for GUDEV... no
configure: error: Package requirements (gudev-1.0 >= 147) were not met:

No package 'gudev-1.0' found

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables GUDEV_CFLAGS
and GUDEV_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

I cannot find any way to install gudev-1.0. I don't know what it is. I don't know what these other 2 suggestions mean or how to execute them.

1) Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix.

2) Alternatively, you may set the environment variables GUDEV_CFLAGS and GUDEV_LIBS to avoid the need to call pkg-config.

Any help with how to rectify this error regarding missing GUDEV would be
greatly appreciated.
↧

[ubuntu] Installed Ubuntu but it won't boot

September 23, 2016, 4:00 pm
$
0
0
As the title says, I've been trying to figure this out for two days now and just can't. I installed Ubuntu 16.04.1 LTS but it just doesn't boot. I've tried literally everything I've seen in every forum post and nothing yet so here I am.

I've tried boot-repair and everything.

Sorry guys, total Linux newbie

http://paste2.org/WjX6nacp
↧
↧

Virtual Machine Upgrade of 14.04 to 16.04 fails

September 23, 2016, 4:36 pm
$
0
0
I have multiple 14.04 VM's that I have been running since 14.04 came out they are all up to date to 14.04.5 but I would like to upgrade them to 16.04.1. I have tried several times and with 2 different VM hosts with no luck. It always gets stuck at asking permission to restart services without asking. It overlays a root@server# and does not continue the upgrade. after performing a reboot I get a long list of broken packages and the OS after that point is completely worthless. Luckily I keep backups of all my VHD's so it is an easy restore but I really don't want to rebuild all of my VM's from scratch so I can be on 16.04. I have tried running them in both VMWare workstation 12 pro and Virtualbox.

Unfortunately the way things are going I may have to rebuild everything anyway because I am trying to switch over to ESXi and it does not like VMWare Workstation pro at all. No compatibility between its own products? What is going on VMWare? Since when did you become Microsoft?

At any rate, any insight would be appreciated.
↧

Upgrade from 14 to 16 no video output on boot

September 23, 2016, 4:51 pm
$
0
0
Hi,

Just upgraded now I have no video at all for the console, ie no command line prompt, no gui/desktop. I can ssh in, is there a way to backout the upgrade?
↧
Search

3 Ubuntu distros go from fast reboot to SLOW after installing nVidia drivers

September 23, 2016, 9:28 pm
$
0
0
Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz
8GB ram
gtx 970

boot-repair info:
http://paste.ubuntu.com/23223011/


Ubuntu Mate 16.04, Kubuntu 16.04, KDE Neon 5.7 (16.04)

Fresh installs and in all 3 cases they went from ~15 sec reboots to 2:30 to over 3 min after installing nVidia drivers. I'm currently on Neon and the driver is 361.42.

Code:
$ systemd-analyze blame
          288ms dev-sdc2.device
          283ms plymouth-start.service
          192ms setvtrgb.service
          155ms systemd-fsck@dev-disk-by\x2duuid-75d98f5c\x2d71f9\x2d4a25\x2dab69\x2d219e516f4e0b.service
          150ms upower.service
          135ms networking.service
          108ms ModemManager.service
            89ms apport.service
            88ms systemd-logind.service
            84ms accounts-daemon.service
            80ms apparmor.service
            80ms thermald.service
            69ms NetworkManager.service
            69ms ondemand.service
            66ms systemd-fsck@dev-disk-by\x2duuid-A4E0\x2d0DEF.service
            65ms grub-common.service
            63ms snapd.firstboot.service
            56ms console-setup.service
            50ms irqbalance.service
            49ms plymouth-read-write.service
            48ms systemd-udev-trigger.service
            47ms gpu-manager.service
            37ms mnt-FH_WD_BLACK_FILES.mount
            35ms iio-sensor-proxy.service
            35ms keyboard-setup.service
            30ms systemd-journald.service
            28ms packagekit.service
            26ms udisks2.service
            25ms systemd-udevd.service
            24ms systemd-user-sessions.service
            22ms systemd-tmpfiles-setup.service
            22ms plymouth-quit.service
(there's more but just more milliseconds)

Any help or insights so appreciated.
Thanks
↧

Remove Hackintosh partitions using Kubuntu 16.04 USB?

September 24, 2016, 2:31 am
$
0
0
Hello everyone! I need some help here. (This may be in the wrong place, but if it is, please, mods, move it.)

I have a Hackintosh laptop (Lenovo Z50-70), and I want to remove all the HFS+ partitions on the hard drive to install Kubuntu.

I'm not sure how I should. GParted shows all my partitions (including HFS+) and allows me to remove them, but I'm not sure if it is safe to.
↧
↧

[SOLVED] 15.10 - Software Updater says up to date, but my software is old

September 24, 2016, 5:57 am
$
0
0
Hello all, here are my basics:
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 15.10
Release: 15.10
Codename: wily

I start Software Updater and it says "The software on this computer is up to date" and I'm reminded that 16.04 is available.
However I haven't been prompted for an update in weeks, my Flash player is out of date, I have a feeling updates are out there and my system isn't getting them.

My download server group was custom but I changed that to 'Server from United States', rechecked for updates but there are none. My Software and Updates configuration look reasonable but I'm happy to post those if it helps.
Also have plenty of free disk space.
Tried an apt update and apt-list upgradable, I there's a few updates about Nautilus but I'd expect far more updates.

Thanks for reading and for any help with this.
↧

Database client version mismatch in PhpMyAdmin

September 24, 2016, 6:04 am
$
0
0
Hello!

I use Ubuntu 14.04.1 Desktop and in PhpMy Admin I see this:

Database client version: libmysql - 5.5.50

But when I do this in the terminal:

mysql -V

I get ver. 5.5.52

Also in Synaptic Package Manager, when I go to "Databases", I see both mysql server and mysqlclient are 5.5.52
And in "Libraries" I see libmysqlclient18 also 5.5.52
↧

Ubuntu 16.04, Dell Inspiron 5000, AMD e Intel GPU

September 24, 2016, 9:45 am
$
0
0
hello,


this is my first interaction in the forum, so I apologize for any misunderstanding.


I have a problem since the release of Ubuntu 04.16 to use the GPU dedicated mue laptop.


I have a Dell Inspiron 5000 with a GPU integrated Intel and other dedicated AMD. I'm already aware that you can not use the proprietary drivers from AMD, and it would take using the opensource driver. None of this is a problem.


I just can not check my AMD card, much less have an idea of how would the Intel GPU switching to AMD and also its opposite.


I wonder if the community could help me ill with content that could be used for someone who is learning Linux Ubuntu.
↧
Viewing all 26379 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>