After upgrading Ubuntu 10.04 to 11.10 I had a problem my display was not reconized.Then tried to instal the Nvidia proprietry driver, but it failed.
After a lot of try and error ( to much to tell ), removed all nvidia* and reinstalled Nouveau.
But still having problems.
When I create an xorg.conf, there are a lot of warnings about drivers missing,
As soon I delete/move away the xorg.conf, I get the 1024/768 display back, which is too small and should be 1280/1024.
I read a lot about xrandr and cvt, but can't get it to work.
This is the xorg.conf that I use, but breaks the GUI.
It is an edited previously automatic generated xorg.conf.
I am even not shure if it is used or just interferes with somthing else.
Please , can someone point me to a solution.
After a lot of try and error ( to much to tell ), removed all nvidia* and reinstalled Nouveau.
But still having problems.
When I create an xorg.conf, there are a lot of warnings about drivers missing,
Quote:
|
(==) Using config file: "/etc/X11/xorg.conf" (==) Using system config directory "/usr/share/X11/xorg.conf.d" WARNING: Error inserting wmi (/lib/modules/3.0.0-31-generic/kernel/drivers/platform/x86/wmi.ko): No such device WARNING: Error inserting mxm_wmi (/lib/modules/3.0.0-31-generic/kernel/drivers/platform/x86/mxm-wmi.ko): No such device WARNING: Error inserting i2c_algo_bit (/lib/modules/3.0.0-31-generic/kernel/drivers/i2c/algos/i2c-algo-bit.ko): No such device WARNING: Error inserting drm (/lib/modules/3.0.0-31-generic/kernel/drivers/gpu/drm/drm.ko): No such device WARNING: Error inserting drm_kms_helper (/lib/modules/3.0.0-31-generic/kernel/drivers/gpu/drm/drm_kms_helper.ko): No such device WARNING: Error inserting ttm (/lib/modules/3.0.0-31-generic/kernel/drivers/gpu/drm/ttm/ttm.ko): No such device FATAL: Error inserting nouveau (/lib/modules/3.0.0-31-generic/kernel/drivers/gpu/drm/nouveau/nouveau.ko): No such device (EE) [drm] failed to open device (EE) No devices detected. |
I read a lot about xrandr and cvt, but can't get it to work.
This is the xorg.conf that I use, but breaks the GUI.
Quote:
|
# nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 (buildmeister@swio-display-x86-rhel47-05.nvidia.com) Wed Jul 27 17:18:55 PDT 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Samsung" ModelName "SyncMaster 910MP" HorizSync 30.0 - 81.0 VertRefresh 43.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nouveau" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection |
I am even not shure if it is used or just interferes with somthing else.
Please , can someone point me to a solution.