After installing ubuntu 12 windows 7 is not showing in my grub anymore can you help?
i have done a grub-update etc.
this is my boot script info
i have done a grub-update etc.
this is my boot script info
Code:
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> Lilo is installed in the MBR of /dev/sda.
=> Lilo is installed in the MBR of /dev/sdb.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdc and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
in partition 72 for .
=> Windows is installed in the MBR of /dev/sdd.
sda1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe /wubildr
/ubuntu/winboot/wubildr /wubildr.mbr
/ubuntu/winboot/wubildr.mbr
sdb1: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 12.10
Boot files: /boot/grub/grub.cfg /etc/fstab /etc/lilo.conf /boot/map
sdc1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc2: __________________________________________________________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdc5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: According to the info in the boot sector, sdc5 starts
at sector 2048.
Operating System:
Boot files:
sdd1: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 115.0 GB, 115033153536 bytes
255 heads, 63 sectors/track, 13985 cylinders, total 224674128 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 224,671,743 224,669,696 7 NTFS / exFAT / HPFS
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 3,907,029,167 3,907,029,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sdb1 2,048 195,311,615 195,309,568 Data partition (Windows/Linux)
Drive: sdc _____________________________________________________________________
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2,048 104,857,599 104,855,552 7 NTFS / exFAT / HPFS
/dev/sdc2 104,859,647 1,948,286,383 1,843,426,737 f W95 Extended (LBA)
/dev/sdc5 104,859,648 1,948,286,383 1,843,426,736 7 NTFS / exFAT / HPFS
Drive: sdd _____________________________________________________________________
Disk /dev/sdd: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 63 976,751,999 976,751,937 7 NTFS / exFAT / HPFS
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 8058C68B58C67F80 ntfs OCZ SSD
/dev/sdb1 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5 ext4
/dev/sdc1 D088697688695BCA ntfs Firefox Downloads
/dev/sdc5 F40A8D220A8CE2CA ntfs Overige
/dev/sdd1 00CC96FACC96E964 ntfs WD
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /media/toby/OCZ SSD fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sdb1 / ext4 (rw,errors=remount-ro)
/dev/sdc1 /media/toby/Firefox Downloads fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sdc5 /media/toby/Overige fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
/dev/sdd1 /media/toby/WD fuseblk (rw,nosuid,nodev,allow_other,default_permissions,blksize=4096)
=========================== sdb1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
}
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd1,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt1 --hint-efi=hd1,gpt1 --hint-baremetal=ahci1,gpt1 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
else
search --no-floppy --fs-uuid --set=root 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
set gfxpayload="${1}"
if [ "${1}" = "keep" ]; then
set vt_handoff=vt.handoff=7
else
set vt_handoff=
fi
}
if [ "${recordfail}" != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt1 --hint-efi=hd1,gpt1 --hint-baremetal=ahci1,gpt1 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
else
search --no-floppy --fs-uuid --set=root 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
fi
linux /boot/vmlinuz-3.5.0-17-generic root=UUID=11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5 ro quiet splash $vt_handoff
initrd /boot/initrd.img-3.5.0-17-generic
}
submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5' {
menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5' {
recordfail
gfxmode $linux_gfx_mode
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt1 --hint-efi=hd1,gpt1 --hint-baremetal=ahci1,gpt1 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
else
search --no-floppy --fs-uuid --set=root 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
fi
echo 'Loading Linux 3.5.0-17-generic ...'
linux /boot/vmlinuz-3.5.0-17-generic root=UUID=11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5 ro quiet splash $vt_handoff
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-17-generic
}
menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5' {
recordfail
insmod gzio
insmod part_gpt
insmod ext2
set root='hd1,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt1 --hint-efi=hd1,gpt1 --hint-baremetal=ahci1,gpt1 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
else
search --no-floppy --fs-uuid --set=root 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
fi
echo 'Loading Linux 3.5.0-17-generic ...'
linux /boot/vmlinuz-3.5.0-17-generic root=UUID=11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5 ro recovery nomodeset
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-3.5.0-17-generic
}
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_gpt
insmod ext2
set root='hd1,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt1 --hint-efi=hd1,gpt1 --hint-baremetal=ahci1,gpt1 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
else
search --no-floppy --fs-uuid --set=root 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
fi
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_gpt
insmod ext2
set root='hd1,gpt1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd1,gpt1 --hint-efi=hd1,gpt1 --hint-baremetal=ahci1,gpt1 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
else
search --no-floppy --fs-uuid --set=root 11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5
fi
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
menuentry "Windows 8" {
set root='(hd0,gpt1)'
chainloader /EFI/microsoft/BOOT/bootmgfw.efi
}
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdb1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sdb1 during installation
UUID=11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5 / ext4 errors=remount-ro 0 1
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
--------------------------------------------------------------------------------
============================= sdb1/etc/lilo.conf: ==============================
--------------------------------------------------------------------------------
# /etc/lilo.conf - systemwide LILO configuration (LILO 23)
# details see in manpages: lilo(8) and lilo.conf(5)
# +-------------------------------------------------------------+
# | !! Reminder !! |
# | |
# | Don't forget to run 'lilo' after you make changes to this |
# | conffile or you have installed a new kernel. |
# +-------------------------------------------------------------+
# #################### LILO global section ######################
# With all newer systems (until year 2004) you can use the RAM
# above 15 MB. This option allows the use of this range of RAM.
#large-memory
# With all newer systems you can boot from any partition on disks
# with more than 1024 cylinders. This option allows the use of
# partitions above 1024 cylinders.
lba32
# Specifies the boot device. This is where Lilo installs its boot
# block. It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
# With newer kernel you should use the ID of the boot device, which
# can be found here: /dev/disks/by-id/ata*.
#boot = /dev/sdb
boot = /dev/disk/by-id/ata-Hitachi_HDS722020ALA330_JK1171YAGVD55N
# This option may be needed for some software RAID installs.
#raid-extra-boot = mbr-only
# Enable map compaction. This tries to merge read requests for
# adjacent sectors into a single read request. This drastically
# reduces load time and keeps the map smaller. Using 'compact'
# is especially recommended when booting from a floppy disk.
# It is disabled here by default because it doesn't always work.
#compact
# Set the verbose level for bootloader installation. Value range:
# 0 to 5. Default value is 0.
#verbose = 1
# Specifies the location of the map file. Lilo creates the (sector)
# map file of direct sector addresses which are independent of any
# filesystem.
map = /boot/map
# ---------------------------------------------------------------
# Specifies the menu interface. You have the choice between:
# text: simple text menu with black background and white text
# menu: configurable text menu with background and text colors.
# bmp: graphical menu with 640x480 bitmap background.
install = menu
# A) Customized boot message for choice 'text'.
# For the simple text menu you can set an extra message in the
# created file. Its text will be displayed before boot prompt.
#message = /boot/message.txt
# B) Configuration of the scheme for choice 'menu'.
# Use following coding: <text>:<highlight>:<border>:<title>
# The first character of each part sets the text frontcolor,
# the second character of earch part sets the text backcolor,
# an upper-case character sets bold face text (frontcolor).
# i.g. 'menu-scheme=wm:rw:wm:Wm'. Possible colors:
# k=black, b=blue, g=green, c=cyan, r=red, m=magenta, y=yellow, w=white.
menu-scheme = Wb:Yr:Wb:Wb
#menu-title = " DESDEMONA Boot-Manager "
# C) Configuration of the image for choice 'bmp'.
# For the graphical menu you need a bitmap file, which needs a special
# menu configuration in the file header (see: lilo -E). Ideally you
# use one of the delivered images of the lilo package.
# with 16 colors: onlyblue, tuxlogo, inside
# with 256 colors: coffee
# for Debian: debianlilo, debian, debian-de
#bitmap = /boot/tuxlogo.bmp
# ---------------------------------------------------------------
# Specifies the number of deciseconds (0.1 seconds) how long LILO
# should wait before booting the first image. LILO doesn't wait if
# 'delay' is omitted or set to zero. You do not see the defined menu.
#delay = 20
# Prompt to start one certain kernel from the displayed menu.
# It is very recommeded to also set 'timeout'. Without timeout boot
# will not take place unless you hit return. Timeout is the number
# of deciseconds (0.1 seconds) after there the default image will
# be started. With 'single-key' alias numbers for each menu line can
# be used.
prompt
timeout = 100
#single-key
# ---------------------------------------------------------------
# Specifying the VGA text mode that should be selected when booting.
# The following values are recognized (case is ignored):
# vga=normal 80x25 text mode (default)
# vga=extended 80x50 text mode (abbreviated to 'ext')
# vga=ask stop and ask for user input: choice of text mode
# vga=<mode> use the corresponding text mode number. A list of
# available modes can be obtained by booting with
# vga=ask' and then pressing [Enter].
# Another way is the use of frame buffer mode. Then the kernel
# will switch from the normal vga text mode (80x25) to the frame
# buffer mode (if frame buffer support is in the kernel):
# vga=0x314 800x600 @ 16 bit
# vga=0x317 1024x768 @ 16 bit
# vga=0x318 1024x768 @ 24 bit
#vga = ask
vga = normal
#vga = 0x317
# ---------------------------------------------------------------
# Kernel command line options that apply to all installed images go
# here. See 'kernel-parameters.txt' in the Linux kernel 'Documentation'
# directory. I.g. for start into 'init 5' write: append="5"
#append = ""
# If you used a serial console to install Debian, this option should be
# enabled by default.
#serial = 0,9600
# Set the image which should be started after delay or timeout.
# If not set, the first defined image will be started.
#default = Linux
# ################### LILO per-image section ####################
# Each image is configured with the linux kernel (=image) and
# usually with the initrd file. Configure all GNU/Linux systems
# on other partitions, too.
image = /boot/vmlinuz-3.5.0-17-generic
label = "Linux"
#root = /dev/sdb1
root = "UUID=11d0c7d7-5e6d-48cc-80b3-709e5b8e80c5"
read-only
# restricted
# alias = 1
# optional
initrd = /boot/initrd.img-3.5.0-17-generic
--------------------------------------------------------------------------------
=================== sdb1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
= boot/grub/grub.cfg 1
= boot/initrd.img-3.5.0-17-generic 1
= boot/vmlinuz-3.5.0-17-generic 1
= initrd.img 1
= initrd.img.old 1
= vmlinuz 1
=============================== StdErr Messages: ===============================
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in