Rpi initially boots SD to berryboot. It then boots Ubuntu from SSD. 18.04.4 LTS runs OK. Then i need to install tasksel.
From the log below it seems tasksel loader is expecting to find a 'normal' boot procedure not the indirect berryboot I am using.
Is there some script somewhere that needs modication to boot indirectly fromSSD?
Here is the log ...
$ sudo apt-get install tasksel
ubuntu@ubuntu:~$ sudo apt-get install tasksel
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
laptop-detect tasksel-data
The following NEW packages will be installed:
laptop-detect tasksel tasksel-data
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
Need to get 40.2 kB of archives.
After this operation, 312 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Do you want to continue? [Y/n] y
Get:1 http://ports.ubuntu.com/ubuntu-ports bionic/main arm64 tasksel-data all 3.34ubuntu11 [5476 B]
Get:2 http://ports.ubuntu.com/ubuntu-ports bionic/main arm64 tasksel all 3.34ubuntu11 [28.7 kB]
Get:3 http://ports.ubuntu.com/ubuntu-ports bionic/main arm64 laptop-detect all 0.16 [6016 B]
Fetched 40.2 kB in 1s (49.6 kB/s)
Preconfiguring packages ...
Selecting previously unselected package tasksel-data.
(Reading database ... 89091 files and directories currently installed.)
Preparing to unpack .../tasksel-data_3.34ubuntu11_all.deb ...
Unpacking tasksel-data (3.34ubuntu11) ...
Selecting previously unselected package tasksel.
Preparing to unpack .../tasksel_3.34ubuntu11_all.deb ...
Unpacking tasksel (3.34ubuntu11) ...
Selecting previously unselected package laptop-detect.
Preparing to unpack .../laptop-detect_0.16_all.deb ...
Unpacking laptop-detect (0.16) ...
On the SSD I have
ubuntu@ubuntu:/boot$ ls
System.map-4.15.0-1041-raspi2 config-4.15.0-1041-raspi2 firmware grub
ubuntu@ubuntu:/boot$ ls firmware
bootcode.bin config.txt fixup_cd.dat fixup_x.dat start_cd.elf start_x.elf
cmdline.txt fixup.dat fixup_db.dat start.elf start_db.elf
ubuntu@ubuntu:/boot$ ls grub
grub is empty.
Setting up linux-firmware-raspi2 (1.20190819-0ubuntu0.18.04.1) ...
Error: missing /boot/firmware, did you forget to mount it?
dpkg: error processing package linux-firmware-raspi2 (--configure):
installed linux-firmware-raspi2 package post-installation script subprocess returned error exit status 1
Setting up u-boot-rpi:arm64 (2019.07+dfsg-1ubuntu4~18.04.1) ...
Error: missing /boot/firmware, did you forget to mount it?
dpkg: error processing package u-boot-rpi:arm64 (--configure):
installed u-boot-rpi:arm64 package post-installation script subprocess returned error exit status 1
Setting up laptop-detect (0.16) ...
Setting up tasksel (3.34ubuntu11) ...
Setting up tasksel-data (3.34ubuntu11) ...
Processing triggers for man-db (2.8.3-2ubuntu0.1) ...
Errors were encountered while processing:
linux-firmware-raspi2
u-boot-rpi:arm64
E: Sub-process /usr/bin/dpkg returned an error code (1)
ubuntu@ubuntu:~$
From the log below it seems tasksel loader is expecting to find a 'normal' boot procedure not the indirect berryboot I am using.
Is there some script somewhere that needs modication to boot indirectly fromSSD?
Here is the log ...
$ sudo apt-get install tasksel
ubuntu@ubuntu:~$ sudo apt-get install tasksel
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
laptop-detect tasksel-data
The following NEW packages will be installed:
laptop-detect tasksel tasksel-data
0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
2 not fully installed or removed.
Need to get 40.2 kB of archives.
After this operation, 312 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Do you want to continue? [Y/n] y
Get:1 http://ports.ubuntu.com/ubuntu-ports bionic/main arm64 tasksel-data all 3.34ubuntu11 [5476 B]
Get:2 http://ports.ubuntu.com/ubuntu-ports bionic/main arm64 tasksel all 3.34ubuntu11 [28.7 kB]
Get:3 http://ports.ubuntu.com/ubuntu-ports bionic/main arm64 laptop-detect all 0.16 [6016 B]
Fetched 40.2 kB in 1s (49.6 kB/s)
Preconfiguring packages ...
Selecting previously unselected package tasksel-data.
(Reading database ... 89091 files and directories currently installed.)
Preparing to unpack .../tasksel-data_3.34ubuntu11_all.deb ...
Unpacking tasksel-data (3.34ubuntu11) ...
Selecting previously unselected package tasksel.
Preparing to unpack .../tasksel_3.34ubuntu11_all.deb ...
Unpacking tasksel (3.34ubuntu11) ...
Selecting previously unselected package laptop-detect.
Preparing to unpack .../laptop-detect_0.16_all.deb ...
Unpacking laptop-detect (0.16) ...
On the SSD I have
ubuntu@ubuntu:/boot$ ls
System.map-4.15.0-1041-raspi2 config-4.15.0-1041-raspi2 firmware grub
ubuntu@ubuntu:/boot$ ls firmware
bootcode.bin config.txt fixup_cd.dat fixup_x.dat start_cd.elf start_x.elf
cmdline.txt fixup.dat fixup_db.dat start.elf start_db.elf
ubuntu@ubuntu:/boot$ ls grub
grub is empty.
Setting up linux-firmware-raspi2 (1.20190819-0ubuntu0.18.04.1) ...
Error: missing /boot/firmware, did you forget to mount it?
dpkg: error processing package linux-firmware-raspi2 (--configure):
installed linux-firmware-raspi2 package post-installation script subprocess returned error exit status 1
Setting up u-boot-rpi:arm64 (2019.07+dfsg-1ubuntu4~18.04.1) ...
Error: missing /boot/firmware, did you forget to mount it?
dpkg: error processing package u-boot-rpi:arm64 (--configure):
installed u-boot-rpi:arm64 package post-installation script subprocess returned error exit status 1
Setting up laptop-detect (0.16) ...
Setting up tasksel (3.34ubuntu11) ...
Setting up tasksel-data (3.34ubuntu11) ...
Processing triggers for man-db (2.8.3-2ubuntu0.1) ...
Errors were encountered while processing:
linux-firmware-raspi2
u-boot-rpi:arm64
E: Sub-process /usr/bin/dpkg returned an error code (1)
ubuntu@ubuntu:~$